Princeton Identity's automatic enrollment allows for our readers to match someone using just a face biometric. Once the face is matched, any iris biometrics which are captured during the use of the device will be enrolled to the person's profile. This allows users to enroll iris biometrics without the need to involve an administrator and without a lengthy enrollment process.
The face image can originate either from the access control software, or by an administrator manually uploading an image to the Identity Server's web page. For assistance with the manual process, see the article: Manually add a person to the Identity Server. Regardless of the method used, a portrait which meets Princeton Identity's Enrollment Image Quality Requirements must be included in the user's profile.
The below settings apply to any of the methods when a face is uploaded prior to the first time that a person uses the system. Automatic enrollment occurs on devices that are in identify mode, and it does not require them to be configured for enrollment mode.
Configuring the EyeAllow & Access200
On the IDS homepage, click Devices. On the page that appears, select the unit(s) that will be used in this mode. This will open and automatically log into the webpage of the device. From here, click on Encounter Workflow > Enroll.
Once in the Enroll tab, you will see the options for different biometrics that can be enrolled - note that Automatic Enrollment is not compatible with "Biometric ON Card".
To enable Automatic Enrollment, configure your options, then click Save All. Repeat the above steps for any units that you wish to configure for Automatic Enrollment.
Group Overrides: We now offer the ability to configure grouping during enrollment. You must create a category within the IDS first.
After configuring the category within the IDS, ensure that the name is displayed within the dropdown list
Click "Save All". From now on, any users that are added to the category within the IDS will use these settings for enrollment.
Now, new users with either a card, QR code, or face biometric can approach any device configured for Active Enrollment, and the device will match the face or card attached to their profile, then automatically enroll one or both irises to their profile. That's it! No further action is required to complete enrollment.
Using the Tap-to-Enroll feature:
Starting with update 2.33.0, users can now enroll using the device's on-screen button, no administrator required! As outlined in our QR Code Enrollment/Authentication section, users can enroll using either a QR code or card, or add a card to their profile.
To begin the process, press the "Enrollment Options" button:
Next, select the type of enrollment desired:
Once selected, the device will present the following screen.
After scanning the card,
Option A: The user's card will be used to enroll the user's biometrics.
Option B: If biometrics are presented, they will now be saved to the profile that the card is listed under.
Congratulations! You've now performed a seamless enrollment to the Identity Server!